How do I rebuild a 2450 Raid Array.
I have two Drives in a RAID 1 configuration
on my Dell Poweredge 2450. One of the Drives
Was pulled and is now listed as a "Missing Member".
I'd like the Raid Array to rebuild the Mirror. How
do I get a Poweredge 2450 to do that?
The Server is running Linux Redhat 7.3
but can be brought down for any period
of time to upgrade the firmware/OS.
Do you have ArrayManager or the PERC utility installed?
Go to the array manager console
Go to the controller view
From the menu, pause i/o (be Careful here)
Reseed the drive.
From the menu, click on rescan.
Then it should to automaticall detect the new drive.
Select the drive, Right Click on the new detected drive and add to the
existing array.
then select the entire vitual array and select to recreate the raid
array. RAID 5 - Is Dell BSing me? | keyongtech:: I'm running Windows2000 on a Dell 2450. I have 4 identical harddrives drive in there, and the RAID 5 array should automatically rebuild > itself. Help! http://www.keyongtech.com/2430542-raid-5-is-dell-bsingHOME | Audio Asylum Thread Printer - Audio Asylum:: 2 posts - 1 author - Last post: May 11, 2007In Reply to: Re: RAID Array ? posted by Rod M on May 11, 2007 at 08:49:45: If it took a while to rebuild that 73GB disk, you can imagine how long the I use the Dell 2850 and 2950's (plus a pile of older Poweredge 4600s and to a 2450 and added a 2550, then some 2650s and finally the 2850. http://www.audioasylum.com/scripts/t.pl?f=general&m=480003HOME |
Where was the last debate on wednesday with Mccain and Obama?
INSTANCE / WAITING FOR SPRING
|